RB Designs LLC
Machine Shop Services ~ Custom ~ Motorcycle ~ ATV ~ PWC ~ Small Engine
KX-KDX Stem Swap
KDX/KX Stem Swap Mod
This service includes
We press out the KDX and the KX stems and do the necessary machining on most of the KDX stems at the lower bearing area so the lower bearing will go all the way down and seat on the T-clamp without pushing the stem back out about 2 mm. Note, some early models the KDX stem needs to be knurled to fit and press into the KX T-clamp.
We also supply the necessary steering stem spacer/bushing that goes up inside the upper KX T-clamp to complete your KX swap. If you send a new lower stem bearing and seal, we will install it for you, or we can leave it off or use your old one over.
Send only your KX and KDX lower T-clamps only (with all pinch bolts and hardware removed (don't send the uppers). Please remove all pinch bolts and hardware and remove all grease from the bearings.
$125.00 plus return shipping
$ 45.00 Spacer/bushing only plus return shipping
KDX to KX Axle Mod Kit
This kit will allow you to use your stock KDX wheel assembly and Speedo-drive on 1999~2003 KX 125 & 250 2-stroke front forks only and will not work on the 4-stroke front forks. We modify your stock KDX axle and supply a special axle nut, wheel spacer.
Kit is for KDX 200-220 1999~2003 KX 2-stroke forks only $125.00