KDX 200 / 220 Head Modifications

$45.00 Plus Shipping and Handling*

* Shipping and handling is $15.00 if done alone or $5.00 if done with the carb mod.

This modification is a great enhancer to all of your performance up grades and will give you an additional boost.

I mill the surface and re-cut the squish band. This gives the 200"s more bottom end torque and a snappier rev.

The 220's get a big benefit too, as they are low in the compression department. This will give a better pull through the mid-range and helps with top-end power.

All of these mods are designed so you can still use premium pump gas. On request, I can give you even more compression for the serious  engine builder. This will give more power and you will need to use race fuel.

Shipping instructions; Head must be received in clean condition and anti-freeze/coolant free. Please remove the water spout on the top of the head (do not send) also remove any of the two alignment pins that may has stayed in the head (do not send these pins).

Payment and shipping instructions

This page was last up-dated 06/02/2008